An extra long folding arch ramp is quite ideal to load items such as riding lawn movers, or loading into high trucks. Due to extremely low clearance, these items need a very low loading angle. The 10ft folding arch ATV ramp would perfectly fit the bill.
The aluminum ATV ramps are made of quality aluminum that can withhold a weight of about 1200 pounds. The hinged folding wide track design of this folding arch ATV ramp works with all ATV tire widths.
For maximum traction during loading, the serrated rungs grip the ATV tires and to avoid ramp kick outs, 2 adjustable safety straps are also provided with these ATV ramps.
10' ft. Folding Arch ATV Ramp 2 Set Features:
- High quality aluminum used.
- 2 full ramps in set.
- 120” long and 11.25” width
- 3” feet spacing between the rungs
- Light weight to carry as each rung weighs only 25 lbs
- Rubber fingers to grip tailgate or trailer for easy loading and unloading
The arched design of this folding ATV ramp helps guard against high-centering. It can be stored by folding it to a convenient size of 60”*12”*15.5”
Economic price with additional charges only to states located outside the 48 contiguous states and international orders
Orders for the ATV ramp may be placed over phone or through internet. The product would be shipped safely to one’s doorstep through the best shipping agency.
The 10ft aluminum ATV ramps are quite ideal to load off-road vehicles, lawn movers, etc. which may be difficult to move otherwise.
It may be difficult to load certain items into trucks like the ATVs and lawnmowers. For loading wider ATVs, the trifold aluminum ramp would be the right choice. This trifold aluminum ramp can be conveniently folded and stored in between the wheels of the ATV. This is because it folds to a size of 17” altogether to fit in between the wheels of the ATV. Made up of light weight, yet tough aluminum, these aluminum ATV ramps are quite strong to bear weights up to 1200 lbs.
7 Foot Trifold Ramp Features
- 85” long and 46” wide
- High quality light weight aluminum
- Rubber fingers to grip the tailgate for secure loading and unloading
- Weight: 36 lbs
- Safety straps to secure the ramps to the vehicle
- Tri fold design perfect for wider ATVs and other vehicles
- Can be stored easily by folding it to a convenient size of 85”*15”*5”
The 7 foot trifold ramp is designed to load ATV and other off road vehicles for a maximum loading height of 36”. If the tailgate of the vehicle is higher than this, then a longer aluminum ATV ramp may be preferred. Each 7 foot trifold ramp comes with six rubber fingers. These rubber fingers would be useful to grip to the tailgate without causing any scratches on it. The 2 safety straps (not cables) given along with the ATV ramp would be useful to secure the ramps while loading.
| L x W | Load Cap. | Weight | Storage Height | Rung Spacing | |
| Folded | 90"x18" | ||||
| 1300lbs | 33lbs | 8.5" | 5.85" | ||
| Unfolded | 90"x55" |
Main Features and Benefits
-
Superior Safety:A single safety strap, and a safer load angle compared to conventional ramps, plus raised side rails assist with guiding equipment up ramps.
-
Long, wide, and lightweight. Offering minimum 18” wide loading rungs, 90” long and 55” wide, it can easily load the most popular ATVs made.
-
Easily folds to a compact 18” for simple storage under an ATV.
-
With a loading platform of 55” wide and a 1300 lb capacity, the RevArc 90" ATV Ramp can load nearly every ATV powersport vehicle made.
- Limited Lifetime Warranty Should the ramp ever malfunction from defects in workmanship or materials, it will be repaired or replaced.
For loading four wheelers or lawn movers or any other off road vehicles onto the trucks, the 6 foot aluminum folding ATV ramp is quite ideal. ATV ramps for pickup trucks are quite helpful in loading lawnmowers and other vehicles with ease.
This extra wide (48”) design allows for loading larger ATVs. These ATV ramps for pickup trucks are designed to a loading height of 33” and hence if the tailgate is still higher, one may need to consider a longer ramp. To avoid scratches on the tailgate, these ATV ramps for pickup trucks come with four rubber fingers. While loading, two safety straps (not cables) are provided to secure ramps.
Bi-Fold 6 Foot Aluminum Folding ATV Ramp Features
- High quality aluminum construction
- 71” long and 48” wide
- Weighs only 28 lbs
- Total capacity of 1200 lbs
- Safety straps included to secure ramps to the vehicle or trailer
- Rubber fingers grip your tailgate for secure loading and unloading
- Folds to a convenient size for easy storage
These aluminum ATV ramps for pickup trucks are made for convenient loading and unloading of ATV, lawnmowers and other off-road vehicles onto the pickup trucks. They can also be conveniently stored as they occupy very little space after folding.
These ATV ramps are available online at unbelievable price and can be shipped anywhere in the world. However, additional charges may be levied for all states outside the 48 contiguous states and international orders. One can order these aluminum ATV ramps for pickup trucks online or over phone.
For majority of off-road vehicles like ATVs and lawn movers, loading them onto the trucks is a major concern. The bi-fold aluminum ATV loading ramp is very useful to load them onto the trucks with ease. There are many benefits of using these bi-fold aluminum ATV loading ramp. To avoid slippage and scratches to the tail gate of the truck, rubber fingers are provided to the bi-fold aluminum ATV loading ramp. These ATV ramps for pick-up trucks are storage friendly as they occupy very little space after folding. Made of quality light weight aluminum, these bi-fold aluminum ATV loading ramps are quite strong and can withstand a weight of up to 1,200lbs.
Bi-Fold Aluminum ATV Loading Ramp
- High quality aluminum construction
- Weighs only 34lbs
- 91”long and 44” wide
- A total capacity of 1200 lbs
- Folds to a convenient size for easy storage (91”*22”*5”)
- Rubber fingers to hold and avoid scratches on the tailgate of the truck
- Safety straps included to secure the ramps on to the vehicle or trailer
- Not for use with 2 wheeled vehicles
The bi-fold design provides easy storage of the aluminum ATV ramps by reducing the size. These ATV ramps for pick-up trucks are made for convenience and easy loading and unloading of ATVs, lawn mowers, etc. They are easy to carry as after folding, these aluminum ATV ramps can be stored between the wheels of the ATV.
The 6 foot Bi-Fold Ramp has been the standard of the ATV Loading Ramp industry for many years now. This ramp folds in the center and will easily slide between the wheels of your ATV for easy storage. Made of light-weight aluminum, this ramp is easy to use and handle. This ramp is designed for a maximum loading height of 33", so if your tailgate is higher than this, you will want to consider a longer ramp. Each ramp comes with 6 rubber fingers to grip your tailgate without scratching it, as well as 2 safety straps (not cables) to secure your ramps when loading.
-
High-quality aluminum construction
-
1,200 lbs total capacity
-
71" long x 44" wide
-
Weighs only 27 lbs
-
Rubber fingers grip your tailgate for secure loading/unloading
-
Safety straps are included to secure the ramps to your vehicle/trailer
-
Folds to a convenient size for easy storage (71"x22"x4")
-
Not for use with 2 wheeled vehicles (motorcycles)
With a 3,000 lbs total loading capacity, this ramp can load just about anything, and it still folds up for easy storage. This ramp can be used to load the heaviest of ATVs, as well as riding lawnmowers, golf carts, etc. The arched design makes for easy loading and convenience, while the added capacity gives you the ability to load a wide array of vehicles with the same ramps.
Ramps fold in half for easy storage. Each set has 4 rubber fingers per piece to easily grip your tailgate without damaging it.
- Set of 2 Pieces
- High-quality aluminum construction
- 3,000 lbs total capacity (1500 lbs per piece)!!!!
- 91" Long x 11.25" Wide
- 4" Spacing between rungs
- Each ramp weighs only 25 lbs
- Rubber fingers to grip tailgate/trailer for easier loading/unloading
- Arched design to help guard against high-centering
- Safety straps are included to secure the ramps to your vehicle/trailer
- Fold to a convenient size for easy storage (46"x12"x5.5")
- Not for use with equipment that runs on "Tracks"
- Set of 2 Pieces
- High-quality aluminum construction
- 2,500 lbs total capacity (1250 lbs per piece)!!!!
- 95" Long x 18" Wide
- 3" Spacing between rungs
- Each ramp weighs only 26 lbs
- Rubber fingers to grip tailgate/trailer for easier loading/unloading
- Arched design to help guard against high-centering
- Safety straps are included to secure the ramps to your vehicle/trailer
- Each piece folds to a convenient size for easy storage (48"x18"x5.5")
- Longer Versions (10 foot and 12 foot lengths) available
This aluminum folding arch ramp is a great ramp at a great price. It is light weight and easy to use, work great with all ATVs, riding lawn mowers, light-weight golf carts, and other four-wheeled vehicles when loading into the bed of a pickup or trailer.
Ramps fold in half for easy storage. Each set has 3 rubber fingers per piece to easily grip your tailgate without damaging it. Each set also includes 2 safety straps (not cables) for your safety.
- 2 Full Ramps in Set
- High-quality aluminum construction
- 1,500 lbs total capacity
- 91" Long x 11.25" Wide
- 4" Spacing between rungs
- Each ramp weighs only 16 lbs
- Rubber fingers to grip tailgate/trailer for easier loading/unloading
- Arched design to help guard against high-centering
- Perfect for all ATVs
- Safety straps are included to secure the ramps to your vehicle/trailer
- Fold to a convenient size for easy storage (47"x12"x5.5")
These ramps are designed to load ATVs, Riding Lawnmowers, and any other 4 wheeled equipment. With a distributed load rating of 750 lbs per runner, these ramps will handle almost anything. The arched design provides maximum clearance which is needed when loading lawnmowers due to the low cutting deck clearance. Each piece has 3 rubber fingers to easily grip your tailgate without scratching or damaging it. Each piece also comes with a safety strap (not cable) to secure your ramp when loading.
-
Set of 2 Pieces
-
High-quality aluminum construction
-
1,500 lbs total capacity (750 per piece)
-
91" long x 11.25" wide
-
Weighs only 28 lbs (14 lbs/per piece)
-
Rubber fingers grip your tailgate for secure loading/unloading
-
Safety straps are included to secure the ramps to your vehicle/trailer
-
3" Rung spacing
-
Arched design for maximum clearance
This aluminum folding arch ramp is a great ramp at a great price. The plated top of this ramp makes it ideal to load items with smaller wheels that could hang up in between the 3" rungs of similar ramps. This ramp is very versatile and can be used to load ATVs, riding lawnmowers and most other 4 wheeled equipment. The raised lip of the holes in the plates gives you extra traction during loading. This ramp is not intended to load large motorcycles.
Ramps fold in half for easy storage. Each set has 3 rubber fingers per piece to easily grip your tailgate without damaging it. Each set also includes 2 safety straps (not cables) for you safety.
- Set of 2 Pieces
- High-quality aluminum construction
- 1,500 lbs total capacity
- 91" long x 11.25" wide
- Each ramp weighs only 16 lbs
- Plated tops with raised lips help provide traction
- Rubber fingers for gripping tailgate/trailer for easier loading/unloading
- Perfect for machines with smaller wheels (lawnmowers, etc)
- Safety straps are included to secure the ramps to your vehicle/trailer
- Fold to a convenient size for easy storage (47"x12"x5.5")
- Durable and lightweight ramp is weather-resistant and built from 6063 aluminum
- E-Z grip rubber truck rest prevent tailgate damage
- Ramp comes equipped with a tie-down strap for safe and worry free loading
- 5 year guarantee on every Posse ramp against workmanship and defects
- 44" wide & 71" long
- Folded width 21 1/2"
- Maximum load capacity 1200lbs
- Weight is 25 lbs
Additional shipping charge for oversized item: $30.00
The PVI Multifold ramp features the unique multifold design that allows this ATV Ramp when folded to take up very little space. The ramp folds down the center than in half again. This ramp will easily slide between the wheels of your ATV after being loaded into your truck or trailer. PVI only makes their products from lightweight high strength aluminum. One of the key benefits of an aluminum ramp is that the aluminum will not rust. With this design and the lightweight high strength aluminum construction the PVI ATV Ramp will support of to 1000lbs.
The ATV Ramp measures 74"x46" when unfolded and only 23"x40" folded. Ridged cross bars increase the traction while loading and unloading even wet, muddy conditions.
PVI Multifold ATV Ramp Specifications
- Unfolded dimensions: 74"x46"
- Folded dimensions: ONLY 23"x40"
- 1000lb weight limit
- Constructed from high strength lightweight aluminum
The PVI Single Fold ATV Ramp is made from the highest quality aluminum and features a 1200lb weight limit. The ATV ramp folds in the center to allow storage of the ramp underneath the quad while the quad is loaded into the truck. The majority of customers use these ATV ramps for pick up trucks and they perform very well. When purchasing for you truck attempt to purchase a ramp that is as close to the width of the truck bed as possible. We currently have 6 models with varying width and length to accommodate different widths and lengths of truck beds. The PVI ATV Ramps have a 1200lb weight limit when both sides of the ramp are being used.
PVI Folding ATV Ramp Specifications
- 1200lb weight limit
- All aluminum rust free construction
- Center folding
- Heavy duty side rails
- Size sizes available
- Superior Safety:
- Safety instructions included, a single safety strap, and a safer load angle compared to conventional ramps, plus raised side rails assist with guiding equipment up ramps.
- Long, wide, and lightweight. Offering minimum 22” wide loading rungs, 90” long and 64” wide, it can easily load the most popular ATV / UTV's made.
- Easily folds to a compact 22” for simple storage under an UTV. With a loading platform of 24-64.5” wide and a 2100 lb capacity, the RevArc HD UTV Ramp” can load nearly every ATV / UTV powersport vehicle made.
- Limited Lifetime Warranty- Should the ramp ever malfunction from defects in workmanship or materials, it will be repaired or replaced.
This ramp is perfect for loading wider ATVs and other vehicles. This Tri-fold folds down to only 17" wide for easy storage between the wheels of your ATV. Made of light-weight aluminum, this ramp is easy to use and handle. This ramp is designed for a maximum loading height of 33", so if your tailgate is higher than this, you will want to consider a longer ramp. Each ramp comes with 6 rubber fingers to grip your tailgate without scratching it, as well as 2 safety straps (not cables) to secure your ramps when loading.
- High-quality aluminum construction
- 1,200 lbs capacity
- 71" long x 51" wide
- Weighs only 28 lbs
- Rubber fingers to grip your tailgate for secure loading/unloading
- Tri-fold design perfect for wider ATVs/vehicles
- Safety straps are included to secure the ramps to your vehicle/trailer
- Folds to a convenient size for easy storage (71"x17"x4")
